viii
AA-6800/6650 Instruction
Electrodes of some hollow cathode lamps contain harmful metal elements (As, Be, Hg, Se, etc.). Some
electrode metals may ignite when touched with air or water (K, Li and Na). Read the precautions attached to the
hollow cathode lamp thoroughly and handle the lamp very carefully for safety.
1. When disposing of the lamp
If the hollow cathode lamp should be broken or its life is finished, dispose of the lamp separately from
general garbage. When disposing of the hollow cathode lamp supplied from Shimadzu Co., select a
method which will not influence the environmental pollution or human body, or ask a special disposal
dealer.
The material of hollow cathode lamp are as follows.
• Metals (including electrode element)
• Quartz glass
• Plastic
Some electrode contains harmful metal (Hg, As, etc.).
2. Specifications change
The specifications of the hollow cathode lamp are subject to change for improvement without notice. In this
case, set the lighting current referring to the precautions attached to the hollow cathode lamp.
When disposing of the lamp
If the deuterium (D2) lamp should be broken or its life is finished, dispose of the lamp separately from general
garbage. When disposing of the deuterium (D2) lamp supplied from Shimadzu Co., select a method which will
not influence the environmental pollution or human body, or ask a special disposal dealer.
The material of deuterium (D2) lamp are as follows.
• Metals (Tungsten)
• Quartz glass
• Ceramic
•Plastic
Waste liquid discharged during measurement or pretreatment should be handled in different ways in
accordance with the solute and solvent contained in that waste liquid. The way of handling waste liquid is
different depending upon the country or region.
Be sure to dispose of waste liquid according to the location of use.
When handling waste liquids, wear protective gloves and safety goggles.
Precautions on Handling Hollow Cathode Lamp
Precautions on Handling Deuterium (D2) Lamp
Handling Waste Liquid
To Next Page
Loading...
