ii
AA-6800/6650 Instruction
The atomic absorption spectrophotometer is used as analytical equipment for inorganic chemical analysis.
To operate this equipment safely, strictly observe the following precautions. If not observed, the safety may be
compromised.
Do not use the equipment for any purpose other than the above-mentioned types of analysis.
Follow the procedures described in the instruction manual.
Observe all warnings and cautions.
Do not disassemble or modify the equipment without the express approval of an authorized Shimadzu
Representative.
For internal repair of the equipment, contact your Shimadzu Representative.
If the user or usage location changes, ensure that this Instruction Manual is always kept together with the
product.
To ensure safe operation, contact your Shimadzu representative if product installation, adjustment, or
re-installation (after the product is moved) is required.
The meshed descriptions about installation in this instruction manual are intended for Shimadzu service
personnel. Don't use them and install the parts by yourself because it is dangerous.
In this manual, the meaning of caution signs are provided as follows.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in serious injury or
possibly death.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor to moderate
injury or equipment damage.
NOTE
Emphasizes additional information that is provided to ensure the proper use of this product.
Precautions for Safe Operation
To Next Page
Loading...
