Shimadzu AGS-X Series - Inspection

Chapter 4 Operating Panel
4-34
2. Inspection
 Displaying Inspection Values
Displays test force and measured sensor input values.
[Setting Procedure]
[Setting Value]
• Force Displays measured test force values.
• Analog1 Displays measured Analog Input 1 values.
• Analog2 Displays measured Analog Input 2 values.
• Digital1 Displays measured Digital Input 1 values.
• Digital2 Displays measured Digital Input 2 values.
Examination
Test Force
Displays
Measured Value
Examination
>Force
0.000 N
SYSTEM