14
Charging the battery while installed onto the bicycle
< EC-E6000/BT-E6000/BT-E6001/BT-E6010/BT-E8010/BT-E8020 >
1.
Insert the battery charger power plug into the outlet.
2.
Insert the charging plug into the charging port on the battery mount or the battery.
<BT-E6000/BT-E6001>
Battery mount
Charging port
Charging plug
<BT-E8020>
Battery
Charging plug
Charging port
<BT-E6010/BT-E8010>
Battery mount
Charging plug
Charging port
<BT-E6010> <BT-E8010>
Battery
Charging port
Charging plug
NOTICE
•
Place the battery charger main body on a steady surface such as the floor before charging.
•
Stabilize the bicycle to ensure that it does not collapse during charging.
•
Make sure that the charging port cap is closed securely.
<BM-E6000>
Charging port cap
<BM-E6010>
Charging port cap
To Next Page
Loading...
