25
Turning the power ON / OFF
Automatic power off function
If the bicycle has not moved for over 10 minutes, the power will automatically turn off.
< SC-E6010 >
Turning the power ON and OFF via the cycle computer
•
Hold down the power button on the cycle computer for
2 seconds.
NOTICE
If built-in battery of cycle computer isn't charged sufficiently, the
power will not turn on.
The built-in battery of the cycle computer is charged only when
the cycle computer screen is on.
Power button
< BT-E6000/BT-E6001/BT-E6010/BT-E8010/BT-E8020 >
Turning the power ON and OFF via the battery
Press the power button on the battery. The LED lamps will
light up indicating remaining battery capacity.
CAUTION
• When turning on the power, check that the battery is firmly
attached to the holder.
• Power cannot be turned on while charging.
• Do not place your foot on the pedals when turning on. A
system error may result.
BT-E8010/BT-E8020 can be forced to power off by holding down
the power button for 6 seconds.
<BT-E6000/BT-E6001>
Power button
<BT-E6010>
Power button
<BT-E8010>
Power button
<BT-E8020>
Power button
To Next Page
Loading...
