39
Clearing the traveling distance
You can clear the traveling distance in the main screen. When the traveling distance is cleared, [TME], [AVG] and [MAX] are
also cleared.
1.
Change the traveling data display to [DST] and press
Function button for 2 seconds.
2.
Release the finger when the [DST] indication starts
blinking.
In this state, pressing Function button again clears
the traveling distance.
•
The [DST] indicator light stops blinking and the
screen takes you back to the basic screen after
leaving it alone for 5 seconds.
Switch the gear shifting mode
This function is only for electronic gear shifting by internal geared hub.
1.
Press Shift-A at the basic screen.
Each press switches between [Manual] and [Auto].
Shift
[Auto]
Automatically shift gears according to
the pedal load.
[Manual]
Manually operate the gear-shift
mechanism for electronic gear shifting.
< SC-E6100 >
Automatic
Manual
< SC-E7000 >
Automatic
Manual
To Next Page
Loading...
