Shimano Steps DU-E6002 - Page 45

https://shimano-steps.com/
86 87
https://shimano-steps.com/
E8000 Series
E6000 MANUALE8000 CONCEPT E8000 MANUAL E6000 CONCEPT
Cycle Computer
<SC-E8000>
SC-E8000
Series SHIMANO
Model no. SC-E8000
Color
1 Standard
2 -
3 -
Mount position Center on handlebar X
Master unit -
Wireless system ANT private/Bluetooth® LE
Firmware update by E-tube Project X
E-tube port (pcs) 4
E-tube connector (pcs) 0
Back Light X
LCD size (inch) 1.6
Beep X
Display Detachable -
Display Change Button X
Reset button -
Inside battery X
System on/off button -
Light on/off button -
Auto Start & Auto Stop -
Contents of Display
Clock X
Assist mode display X
Battery charge level ***X
Current Speed X
Gear Position Display *,***X (11spd)
Start mode -
Automatic shift mode -
Maximum speed ** X
Average speed ** X
Trip distance X
Trip time ** X
Odometer X
Estimated range X
Range overview -
Assist power indicator X
Error Message X
Cadence X
Human Out put Power X
Calorie X
Setting menu
Trip Distance reset X
Odometer reset -
Setting Clear -
Clock adjustment X
Start mode -
Back light on/off -
Light on/off X
Back light brightness X
Beep on/off X
Unit (km/mile) X
Font color -
Adjusting for shift *,***X
Adjusting for auto shift
timing
-
RD protection Reset *,***X
Bluetooth® LE pairing X
Bluetooth® LE/ANT
connection status
X
Language
English X
German X
Dutch X
French X
Spanish X
Italian X
Note
2 Spec of clamp band
diameter.
φ
31.8 and
φ
35.0
* In case of SEIS
** Option by E-tube project
*** Data of list of "Display
function" is sent to other
digital device by ANT private.
SPECIFICATION SHEET
See our website at http://si.shimano.com for the latest information.
Switch Unit
<SW-E8000-L>
SW-E8000-L
Series SHIMANO
Model no. SW-E8000-L
Switch Type FIREBOLT
Color
1 Standard
2 -
3 -
Usage For assist
Right SW -
Left SW X
Switch numbers (pcs) 2
Master unit -
Firmware update by E-tube Project X
E-tube port (pcs) 1
E-tube connector (pcs) 0
System On-Off -
Assist Mode Change X
Display change -
Automatic/Manual Change -
Light On-Off -*
Multiple input
2 step -
Hold -
Note * By Setting Menu