Shimano Steps SM-BCC1 User Manual

30
< Switch to walk assist mode >
* The Walk assist mode function may not be able to be
used in certain regions.
1. Press Assist-Y to switch the mode to [OFF].
2. Press Assist-Y once again 2 seconds until [WALK] is
displayed.
3. Press and hold Assist-Y to start walk assist.
< SW-E6000 >
Assist Shift
2 Sec.
< SW-E6010 >
Assist Shift
2 Sec.
< SC-E6010 >
< SC-E6000 >
< Walk assist mode operation >
* The Walk assist mode function may not be able to be
used in certain regions.
When [WALK] is displayed, press and hold down Assist-Y
on the assist switch to start the walk assist function.
Releasing Assist-Y stops the walk assist function, or
pressing Assist-X can stop the walk assist function.
< SW-E6000 >
Assist Shift
Press
and
hold
down
< SW-E6010 >
Press
and
hold
down
Assist Shift

Shimano Steps SM-BCC1 Specifications

General

Brand	Shimano Steps
Model	SM-BCC1
Category	Switch
Language	English