33
Turning the battery-powered light ON or OFF
< SC-E6000 >
When the battery-powered light is connected,
pressing the Assist-A for 2 seconds displays this
information instead of the clock and assist mode. The
light turns on and off each time it is displayed. It is
displayed for about 2 seconds.
< SW-E6000 >
Assist Shift
2 Sec.
< SW-E6010 >
When the light is
turned on
When the light is
turned off
Assist
Shift
2 Sec.
< SC-E6010 >
When the battery-powered light is connected, push
the light button on the cycle computer to turn the
light on. An icon indicating that the light is on
appears on the screen. Push the button again to turn
the light off. Once the light is turned off, the icon on
the screen disappears.
*
When the battery powered light is not connected and
[Backlight] is set to [MANUAL], pressing the light
button turns the cycle computer’s backlight on and
off.
When the light is
turned on
When the light is
turned off
Light button
The light turns off in conjunction with the battery power.
When the battery power is off, the light is off.
To Next Page
Loading...
Need help?
General
