How to fix stiff pedaling on my Shimano Scooter?
If pedaling feels stiff on your Shimano Scooter, consider these possibilities: * Ensure the tires are inflated to a sufficient pressure using a pump. * Check that the assist mode is set to [BOOST]. * A low battery may cause stiff pedaling. Charge the battery fully.
Why does the battery on my Shimano STEPS E8000 drain so fast?
If the battery on your Shimano Scooter is losing charge quickly, it may be nearing the end of its service life. Consider replacing it with a new one.
What to do if my Shimano Scooter shows error E010?
If your Shimano Scooter displays error code E010, it indicates a system error. Try pressing the power button on the battery to turn it on again.
Guidelines for safe operation and warnings to avoid injury.
Instructions for safe handling, storage, and precautions against damage or leakage.
Explanation of different assist modes (BOOST, TRAIL, ECO, OFF, WALK) and their applications.
Critical safety warning regarding using specified chargers to prevent overheating or ignition.
Safety precautions for handling charging plugs and cords to avoid injury or damage.
Instructions for charging different battery models separately.
Procedures for charging the battery when it is mounted on the bicycle.
Step-by-step guide for installing different battery models.
Instructions for safely removing the battery using the key.
Steps for removing the BT-E8020 battery using the keyhole cap and key.
How to switch between different assist modes using the cycle computer buttons.
Procedure to activate and use the walk assist function.
Explains error codes indicated by battery LED patterns and their remedies.
Lists warning codes, their display preconditions, restrictions, and remedies.
Addresses issues where the assist function is not working correctly and provides solutions.
Troubleshooting common battery issues like loss of charge, inability to recharge, and overheating.
To Next Page
General