Shop fox W1829 User Manual

OWNER'S MANUAL
(FOR MODELS MANUFACTURED SINCE 9/11)
MODEL W1829
6" JOINTER
Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz
COPYRIGHT © SEPTEMBER, 2011 BY WOODSTOCK INTERNATIONAL, INC. REVISED AUGUST, 2012 (ST)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
#14362KN Printed in China

Shop fox W1829 Specifications

General

Brand	Shop fox
Model	W1829
Category	Power Tool
Language	English

Summary

Machine Specifications Overview

Controls & Features Identification

Safety First: Essential Precautions

Standard Safety Instructions

General safety rules for operating woodworking machinery.

Jointer-Specific Safety Guidelines

Safety precautions and warnings unique to jointer operation.

Electrical Requirements and Connections

Circuit Requirements for Power

Specifies the necessary power supply type, voltage, and circuit protection.

Grounding & Extension Cord Guidance

Initial Setup Procedures

Unpacking and Inventory Check

Bench Mounting Options

Jointer Assembly Guide

Step-by-Step Assembly Instructions

Detailed instructions for assembling the jointer components.

Operations: Getting Started

General Operations and Basic Controls

Stock Inspection and Requirements

Guidelines for selecting and preparing wood for safe and effective jointing.

Squaring Stock Procedure

Steps for making lumber square using the jointer's capabilities.

Surface Planing Technique

Method for creating a flat face on a workpiece.

Edge Jointing Technique

Process for creating a flat edge suitable for joinery.

Bevel Cutting Procedure

Instructions for cutting angled edges on workpieces.

Routine Maintenance Practices

General Maintenance and Cleaning

Service and Troubleshooting Guide

General Service and Troubleshooting

Motor and Electrical Issues

Diagnosing and resolving problems related to the motor and wiring.

Operation-Related Issues

Troubleshooting common problems encountered during jointer use.

Knife Height Adjustment

Replacing Cutterhead Knives

Setting Fence Angle Stops

V-Belt Replacement Procedure

Motor Brush Replacement