To Next PageTo Next Page
Need help?Do you have a question about the Shop fox W1876 and is the answer not in the manual?
General| Brand | Shop fox |
|---|---|
| Model | W1876 |
| Category | Power Tool |
| Language | English |
Information on contacting Woodstock technical support for assistance with the machine.
Diagram and labels identifying the various parts and controls of the jointer.
Description of key components like outfeed table, cutterhead guard, and infeed table.
Description of fence-related parts like fence slide lock and tilt lock handles.
Explanation of danger, warning, caution, and notice symbols used in the manual.
General safety guidelines for operating machinery, including operator training and environment.
Covers apparel, dust, hearing protection, tool removal, intended use, and positioning.
Additional safety precautions specific to jointer operation, including kickback and guards.
Details on power supply circuit size, type, and voltage needed for the machine.
Explanation of the importance of grounding and correct connection procedures.
Guidelines for selecting and using extension cords with the machine.
Instructions for safely unpacking the machine and checking for shipping damage.
List of tools and materials required but not included for setting up the machine.
List of included parts and hardware to verify against the box contents.
Guidance on selecting a location and ensuring adequate space for the jointer.
Procedure for removing rust preventative and cleaning the machine's surfaces.
Details on 'Through Mount' and 'Direct Mount' methods for securing the machine.
Step-by-step instructions for assembling the jointer components.
Steps to perform a test run to ensure proper function and safety features.
A basic overview of how to operate the jointer, intended for novice users.
Rules for selecting and preparing wood stock before jointing.
How to adjust the infeed table to control the depth of material removed.
Steps involved in making wood stock flat, parallel, and square.
Instructions for making one flat face on a workpiece using the jointer.
Process of creating a flat and true surface along the edge of a workpiece.
How to set the fence and feed workpiece to create bevel cuts.
Information on available accessories for the jointer, including part numbers.
Details on safety glasses, dust collectors, and books for woodworking.
Overview of ongoing and monthly checks for machine upkeep.
Instructions on lubricating the fence slide bracket and general lubrication points.
Covers common service adjustments and contact info for additional help.
Procedure for rotating or replacing indexable cutterhead inserts.
Steps for cleaning the cutterhead area and inserts before installation.
Procedure to verify if outfeed and infeed tables are parallel to the cutterhead.
Steps to check the infeed table's parallelism with the outfeed table.
Detailed procedure for adjusting tables to achieve parallelism with the cutterhead.
Procedure to adjust the infeed table to match the outfeed table's position.
Procedure to verify and adjust the 90° and 45° fence angle stops.
Steps to adjust the fence's positive stops for accurate angle setting.
Instructions for replacing the drive belt and adjusting its tension.
Procedure for replacing worn carbon brushes in the motor.
Troubleshooting guide for problems like machine not starting or breaker trips.
Troubleshooting common operational issues like workpiece sticking or rough cuts.
Warnings and guidelines for working with electrical systems and components.
Diagram showing the location of main electrical components like the motor and switch.
Schematic illustrating the electrical connections and wiring of the machine.
Exploded view diagram showing the main components and their reference numbers.
Detailed list of parts with reference numbers, part numbers, and descriptions.
Diagram showing the location of various warning and identification labels on the machine.
List of part numbers and descriptions for the labels shown on the machine.
Guidance on maintaining and replacing safety labels for continued awareness.
Details of the warranty coverage, limitations, and registration process.
