Shure BT1 - Safety Information; Warning; Information to the User

Shure Incorporated
6/10
•
•
•
•
•
1.
Charging Requirements
USB Source
RMCE-BT1 5VDC,100mA,minimum
RMCE-BT2 5VDC,100mA,minimum
Charging Time
RMCE-BT1 2hours
RMCE-BT2 2hours
Quick Charge
RMCE-BT1
Up to 1.5 hours of play time with 15 minutes of
charge time
RMCE-BT2
Up to 1.5 hours of play time with 15 minutes of
charge time
Battery Charging Temperature Range
RMCE-BT1 0 to 45 °C (32 to 113 °F)
RMCE-BT2 0 to 45 °C (32 to 113 °F)
Safety Information
Visit http://www.shure.com/earphones for the latest regulatory and compliance information.
WARNING
Follow instructions from manufacturer.
Product battery may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble,
heat above 140°F (60°C), or incinerate.
Attention should be drawn to the environmental aspects of battery disposal.
Product shall not be exposed to excessive heat such as sunshine, fire, or the like.
Do NOT make unauthorized alterations to this product.
Note: Battery replacement to be performed only by Shure authorized service personnel.
CAUTION: Follow applicable laws regarding mobile phone and headphone use while driving.
This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
Information to the user
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference.