EasyManuals Logo

Shure Legendary Performance SVX User Manual

Shure Legendary Performance SVX
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
Wireless Tips to Improve System Performance
If you encounter wireless interference or dropouts, try the following suggestions:
Troubleshooting
Problem Solution
No sound
Check the power supply of the microphone and receiver.
Ensurethatthebatteriesareinsertedcorrectly.
Set the transmitter and receiver to the same channel.
Check that the receiver is connected to the input on the audio mixer or
amplifier.
Check that the transmitter is not too far away from the receiver.
Decrease(counterclockwise)thesquelch.
SetthebodypackaudioinputswitchtoMIC.
Makesurethatthereceiverhasaclear,line-of-sightpathtothetransmitter.
Keep the receiver away from metal objects.
Noise from RF
interference
Replace the transmitter batteries.
Checkthereceiverantennalocation.Makesurethereisaclearpathbetween
the receiver and the transmitter.
When using two or more systems simultaneously, chose different channels
withinthesamegroup(channels1-4orchannelsA-D).
Turn off or relocate possible sources of interference such as cell phones, ra-
dios, or other electronic devices.
Increase squelch (clockwise) to restrict the receiver from picking up ambient
noise.
Unplug any unused receivers
Audio
distortion
Adjust levels on the mixer board or sound system.
Makesureallcablesaresecurelyconnectedfromthereceivertothesound
system.
If using a bodypack transmitter, lower the gain settings.
Replace the transmitter batteries
Choose a different frequency channel
Reposition the antennas so there is nothing
obstructing a line of sight to the transmitter (in-
cluding the audience)
Avoid placing transmitter and receiver where
metal or other dense materials may be present
Movethereceivertothetopoftheequipment
rack
Remove nearby sources of wireless interfer-
ence, such as cell phones, two-way radios,
computers, media players, and digital signal
processors
Keeptransmittersmorethantwometers(6
feet) apart
Keep the transmitter and receiver more than 5
meters(16feet)apart
Keep them away from large metal objects
Duringsoundcheck,marktroublespotsand
ask presenters or performers to avoid those
areas

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shure Legendary Performance SVX and is the answer not in the manual?

Shure Legendary Performance SVX Specifications

General IconGeneral
BrandShure
ModelLegendary Performance SVX
CategoryMicrophone system
LanguageEnglish

Related product manuals