Shure Legendary Performance SVX - System Components

System Components
All Systems
• SVX Receiver
• PS21 Power Supply
• Channel Selector Tool
• 2 AA batteries
Handheld Transmitter
• SVX2HandheldMicrophoneTransmitter
• MicrophoneStandAdaptor
Bodypack Transmitter
• SVX1BodypackTransmitter
• Microphone
• PG185LavaliermicrophoneOR
• PG30Headwornmicrophone
Power
Plug in the power adapter to turn on the receiver. There is no power switch.
Insert2AAbatteriesintothetransmitter.Holdthepowerbuttonfortwosecondstoturnon.
Connecting to a Sound System
ConnectthebalancedXLRoutputonthereceivertoaMICorLINEinput.SettheLINEMICswitch
accordingly.
IfthereisnoXLRinput,connecttheunbalanced6.35mm(1/4inch)receiveroutputtoaLINEinput.
SettheLINEMICswitchtoLINE.
Channel
Set the transmitter and the receiver to the same frequency using the channel dial.
Note: If using a dual system (or more than one single system), assign each input to a different
channelwithinthesamegroup(channels1-4orchannelsA-D).Thisensuresthebestsignal
quality.
Bodypack Gain
The gain dial controls the audio volume sent to
the receiver.
• Turn down the gain if the audio signal sounds
distorted.
• TurnupthegainiftheAFLEDlightisfaintor
the audio is too low.
RF Level
ThisswitchsetstheRFlevelofthehandheld
transmitter. It does not affect the audio volume.
• SettoLOtoavoidinterferingwithotherreceiv-
ers when in a building with multiple systems.
• SettoHIfortransmittingoveragreaterdis-
tance when using a single system.
Squelch
SquelchcontrolstheamountofRFsignalthatthe
receiver picks up.
• Turn up the squelch dial (clockwise) to remove
ambientnoisefromunwantedRFsources.
• Turn down the squelch dial (counterclockwise)
if the microphone is not transmitting clearly to
the receiver.
Color ID Rings
Slide these color rings over the handle of the mi-
crophone to identify them. (Sold in a package of
six as an optional accessory.)
7