Shure Incorporated
25/100
Note: You should only use the battery cycle count reset after installing a new battery.
USB Charger
The USB Charger (SBC-USB) can connect to an MXW transmitter to provide power during operation.
Battery Statistics on Control Software
The MXW control software is used to manage battery information. Use the Monitor tab to view battery charging status:
Monitoring Battery Charge Status
In the Charging Station
Displays the remaining time until the microphone battery is fully charged.
During Use
Displays the remaining battery runtime of the microphone.
For battery health statistics, use the Utility tab:
Battery Statistics
Battery Capacity
To Next Page
Loading...
