Shure MoveMic - The Receiver Menu Tree

Shure Incorporated
20/32
•
•
•
•
•
•
•
① Mic Connection Strength Displays connection levels between the mic and the receiver.
② Microphone Name Displays name to identifying microphones.
③ Mic Battery Level Displays icon and percentage of battery strength.
④ Microphone Status Displays microphone type and gain information.
⑤ Microphone Level Meter displays audio signal level and peaks.
The Receiver Menu Tree
My Devices
"Mic Name": Displays the name of connected mic. You can rename each mic for easy identification.
Gain/Mute: Adjust the gain for each microphone so the loudest sounds peak at about 75% of the meter for best quality
sound.
Audio Effects: Your audio settings to dial in the optimal sound.
LED: Turn the transmitter LED off or on.
Identify: Select Identify in the receiver menu to quickly clear up confusion if you forget which microphone is one or two.
The LED flashes on the transmitter for easy identification.
Mode: Use Presets to quickly optimize settings for your application.
Output Settings
Safety Track: The Safety Track is a secondary recording to ensure that you'll have a backup file in case anything should
happen to your audio. You can set the gain for the safety track here.
Monitoring