Why is my Shure MV51 Microphone not working with a USB hub?
The MV51 requires 250 mA per port. Check the USB hub documentation for the current/port specification to ensure it meets the microphone's requirements.
General| Transducer Type | Condenser |
|---|---|
| Polar Pattern | Cardioid |
| Maximum SPL | 130 dB SPL |
| A/D Converter | 24-bit |
| Sampling Rate | 44.1/48 kHz |
| Adjustable Gain Range | 0 to +36 dB |
| Headphone Output | 3.5 mm |
| Housing | All-metal construction |
| Frequency Response | 20Hz - 20kHz |
| Power Requirements | Powered through USB connector |
| Connector Type | Micro-B USB |
| DSP Modes | Acoustic Instrument |
| Sensitivity | -39 dBFS/Pa at 1 kHz |
| Weight | 574 g (1.27 lbs) |
| Dimensions | 86 x 128 x 70 mm (3.39 x 5.04 x 2.76 in.) |
To Next Page
