Shure MVL - User Manual

General Description
The Shure MOTIV MVL is an omnidirectional condenser lavalier microphone,
featuring a 3.5 mm (1/8") Tip Ring Ring Sleeve (TRRS) plug for use with a
portable recording-capable device. By plugging the MVL microphone into
the headphone jack of a smartphone or tablet and opening recording apps
such as the ShurePlus
®
MOTIV recording app, the user can easily and dis-
cretely capture high-quality audio. It is ideal for use in speech and other ap-
plications requiring minimal visibility.
Features
• Superior audio clarity
• Effective immunity to audible interference
• Low self-noise
• More even, natural response across frequency range
• Less susceptible to distortion
• Matte black, sleek, low-profile design for inconspicuous placement
• Snug-fit foam windscreen provides additional protection from plosives
and wind noise
• Includes protective storage pouch, tie clip, and windscreen
• The optional Rycote™ Mini Windjammer fits over the included windscreen
• Legendary Shure quality and reliability
Using the Microphone
15-25cm
(6-10in.)
௟
௠
௡
1. Install the supplied snug-fit windscreen by sliding it over the microphone capsule.
Note: Do not pull the windscreen too tightly over the microphone. Leave a small space inside the windscreen to allow for air movement.
2. Attach the microphone to a shirt or other garment using the supplied tie clip. For best results, the microphone should be 15-25 cm (6-10 in.) away from the
mouth.
3. Plug the 3.5 mm (1/8") plug into your recording device.
To further reduce plosives and wind noise, use the optional Rycote™ Mini Windjammer, which fits over the included foam windscreen.
Specifications
Microphone Capsule
MEMS
Polar Pattern
Omnidirectional
Frequency Response
40 Hz to 20,000 Hz (see frequency response graph)
Output Impedance
350 Ω
1/3©2018 Shure Incorporated
MVL
Omnidirectional Condenser Lavalier Microphone

Summary

General Description

Product Features

Highlights superior audio clarity, low self-noise, natural response, and durable design.

Using the Microphone

Microphone Setup and Placement

Instructions for attaching windscreen, tie clip, and optimal distance from mouth.

Product Specifications

Technical Performance Metrics

Details signal-to-noise ratio, maximum SPL, dynamic range, sensitivity, and output noise.

Electrical and Physical Characteristics

Covers microphone connector, bias, current drain, housing, dimensions, cable, and weight.

Audio Input Connections

Diagram and explanation of microphone and audio input connections for typical devices.

Accessories

Included and Optional Accessories

Lists furnished items like bags and windscreens, and optional accessories like Rycote Windjammer.

Certifications and Compliance

Compliance Information

Details CE Declaration of Conformity and authorized European representative contact information.

Shure MVL Specifications

General

Type	Lavalier
Polar Pattern	Omnidirectional
Connector	3.5 mm TRRS
Microphone Type	Condenser
Sensitivity	-44 dBV/Pa[1] (6.3 mV) at 1 kHz, 1 Pa = 94 dB SPL