Shure ULX - Transmitter Gain; ULX1

Shure Incorporated
18/31
1.
2.
Transmitter Gain
For best audio quality, adjust transmitter gain so only the green and yellow TX AUDIO LEDs flicker. (Occasional illumination of
the red LED is okay.)
Green = nominal
Yellow = peak
Red = overload
ULX1
Settheattenuator(pad)switchto0dBformicrophonesand–20dBforguitars.(Somelowoutputinstrumentsmaynot
need attenuation.)
Adjust gain control as necessary.