SIAD ESA Pyronics ESTRO-PO E7014P - Failed Ignition

ESA ESTRO - E7014P rev. 02 - 03/05/17
www.esapyronics.com
16
F
AILED IGNITION
The following diagram indicates the behaviour in case of 1st gas stage ignition failure.
FLAME SIGNAL LOSS
The following diagram indicates the behaviour if the flame signal is lost with burner in regime phase and with the
“Behaviour at flame loss” parameter configured on “Lockout stop”.
D7014P14
D7014P15
IN FAULT “U”
IN
FAULT “F”