ESA ESTRO - E7014P rev. 02 - 03/05/17
www.esapyronics.com
2
ESA
ESTRO conforms to the EN298 regulation according to the KIP-
16422/G certificate issued by notified body 0476. ESA ESTRO con-
forms to the European Directives: Gas Regulation 2016/426/EC, Low
voltage directive 2014/35/EC, Electromagnetic immunity 2014/30/EC, in
conjunction with the EN298 and EN746-2. The products conform to the
requests for the Euroasia market (Russia, Belarus and Kazakhstan).
CERTIFICATIONS:
GENERAL WARNINGS: GENERAL NOTES:
¾
¾ All installation, maintenance, ignition and setting must
be performed by qualified staff, respecting the norms
present at the time and place of the installation.
¾
¾ To avoid damage to people and things, it is essential
to observe all the points indicated in this handbook. The
reported indications do not exonerate the Client/User
from observing general or specific laws concerning acci-
dents and environmental safeguarding.
¾
¾ The
operator must wear proper DPI clothing (shoes,
helmets...) and respect the general safety, prevention
and precaution norms.
¾
¾ To avoid the risks of burns or high voltage electrocu-
tion, the operator must avoid all contact with the burner
and its control devices during the ignition phase and
while it is running at high temperatures.
¾
¾ All ordinary and extraordinary maintenance must be
performed when the system is stopped.
¾
¾ To assure correct and safe use of the combustion
plant, it is of extreme importance that the contents of this
document be brought to the attention of and be meticu-
lously observed by all personnel in charge of controlling
and working the devices.
¾
¾ The
functioning of a combustion plant can be dange-
rous and cause injuries to persons or damage to equip-
ment. Every burner must be provided with certified com-
bustion safety and supervision devices.
¾
¾ The burner must be installed correctly to prevent any
type of accidental/undesired heat transmission from the
flame to the operator or the equipment.
¾
¾ The performances indicated in this technical docu-
ment regarding the range of products are a result of
experimental tests carried out at ESA-PYRONICS. The
tests have been performed using ignition systems, flame
detectors and supervisors developed by ESA-PYRO-
NICS. The respect of the above mentioned functioning
conditions cannot be guaranteed if equipment, which is
not present in the ESA-PYRONICS catalogue, is used.
To dispose of the product, abide by the local legislations
regarding it.
DISPOSAL:
ASSISTANCE/CONTACTS:
Esa S.p.A.
Via Enrico Fermi 40
24035 Curno (BG) - Italy
Tel +39.035.6227411
Fax +39.035.6227499
esa@esacombustion.it
ESA Belgium
Zoning Industriel, 4ème rue
B-6040 Jumet - Belgium
Tel +32.71.256970
Fax +32.71.256979
marketing@pyronics.be
www.esapyronics.com
¾
¾ In
accordance to the internal policy of constant quali-
ty improvement, ESA-PYRONICS reserves the right to
modify the technical characteristics of the present docu-
ment at any time and without warning.
¾
¾ It
is possible to download technical sheets which
have been updated to the latest revision from the
www.esapyronics.com website.
¾
¾ The products manufactured by ESA-PYRONICS
have been created in conformity to the UNI EN 746-
2:2010 Norms: Equipment for industrial thermal process
- Part 2: Safety requirements for combustion and the
movement and treatment of combustible elements. This
norm is in harmony with the Machine Directive
2006/42/CE. It is certified that the products in question
respect all the requirements prescribed by the above
mentioned Norms and Directives.
¾
¾ Certified in conformity with the UNI EN ISO 9001
Norm by DNV GL.
To Next Page
Loading...
