SiAECOSYS VOTOL EM User Manual

SiAECOSYS V2
23
6.2: the above port functions are factory default configuration, corresponding to Lande 2 × 8 transfer line drawing, and
EM100 is dedicated with anti-theft harness.
S gear
Move the third gear
First line
communication
Temperature control
port cannot be changed
P gear
High break
Stealavoid
Stir up a gear
Reversing
6. The main function of the
corresponding controller is to arrange
and plug each port
7. When changing the function, select
the number sorting table under each
port to change, and each number
corresponds to different functions.
8. The inching function needs to check
the SW option. Dial no option. If the
third gear is inched, the P gear is inched
9. You need to tick LA to move P gear
10. After the function is changed, it
shall be changed together according to
the options on the setting page, and the
function can take effect. (if the port is
set to three gears for fluctuation, and
the setting page is set to three gears for
inching, the function will fail). Port
function configuration.xlsx

SiAECOSYS VOTOL EM Specifications

General

Brand	SiAECOSYS
Model	VOTOL EM
Category	Controller
Language	English