Siargo MF5700 Series User Manual

www.Siargo.com
MF57
00 User Manual
29
|
P a g e
6. Product selection and order information
6.1 Product selection
The product part number is composed of the product model number and suffixes indicating the full-
scale flow rate, as well as the other parameters. Refer to the following for details.
MF57 - - - -
Table 6.1: Units conversion table
Model DN (mm) Connection
Maximum full-scale flow rate
SLPM SCFH NCMH
MF5706 6.0 BSPP 1/4” or NPT 1/4” 20 40 1.2
MF5708 8.0 BSPP 3/8” or NPT 3/8” 100 200 6
MF5712 12.0 BSPP 1/2” or NPT 1/2” 250 500 15
6.2 Order contact and customer support
The sales offices and the sales distributors/representatives are listed at the end of this document. For
small quantities, the order can be placed either through the Siargo website: www.siargo.com or the
sales office. For large quantities, please contact the sales office, distributors, or sales representatives.
Siargo is making every effort to ensure the quality of the products. In case of questions and/or
product supports, please contact the customer service listed at the end of the document.
Gas (A
-
air; C
-
CO
2
; N
-
N2; O
-
O2; R
-
Ar,
for
other gases, please contact the manufacturer.
Output (B
-
RS485 Modbus
).
Maximum full scale flow rate (for
other units refer
to the table below). If the unit is not SLPM, the
unit needs to be specified here.
Mechanical connection
(G
-
BSPP
; N
-
NPT)
DN (pipe inner diameter: 06, 08
or 12 mm)

Siargo MF5700 Series Specifications

General

Brand	Siargo
Model	MF5700 Series
Category	Measuring Instruments
Language	English