2. Double-click to open the SIG350 in the BOOTP/DHCP server.
3. Enter a valid and free IP address in the IP Address field.
4. Click OK
✓
After a waiting period, the SIG350 is displayed under both Request History and
Relation List with the IP address entered.
Permanently assigning IP address
NOTE
The procedure described below can be used to ensure that the address assigned via
BOOTP/DHCP is retained even after a restart of the SIG350.
8 OPERATION
30
O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350 8027834./2022-06-10 | SICK
Subject to change without notice
To Next Page
Loading...
