Quickstart
MLG/XLG modular light grid
Safety notes
CAUTION!
– There are detailed operating instructions in addi-
tion to the quickstart for the MLG/XLG modular
light grid. The quickstart is not intended to re-
place the operating instructions. Instruction
manuals can be downloaded via the internet at
“www.mysick.com”.
– All work such as electrical connection, mounting
and commissioning may only be performed by
skilled persons or skilled electricians.
NOTICE!
– Only operate the light grid using a protected low
voltage and safe electrical insulation according to
protection class III.
– Only carry out wiring work in a de-energized state.
– Only connect and disconnect cable connections
in a de-energized state.
– Reflections, impurities, dazzling, failure of indi-
vidual components and electromagnetic interfer-
ence from other devices can cause incorrect
switching.
Limitation of liability
The manufacturer accepts no liability for damage caused by:
failing to observe the quickstart
incorrect use
use by untrained personnel
unauthorized alterations
technical modifications
use of unauthorized spare and wear parts.
© SICK AG • Advanced Industrial Sensors • Subject to change without notice • 7
8014221
To Next Page
Loading...
