Need help?Do you have a question about the SICK MLG-2 Pro and is the answer not in the manual?
General| Output current Imax. | 100 mA |
|---|---|
| Housing material | Aluminum |
| Enclosure rating | IP65 |
| Ambient storage temperature | -25 °C to +70 °C |
| Accuracy | ± 5 mm |
| Storage Temperature | -25 °C to +70 °C |
| Protection Class | IP65 |
| Light source | Infrared LED |
| Beam separation | 30 mm |
| Interface | RS-485 |
| Power Supply | 24 V DC |
Explains the purpose of the operating instructions for the MLG-2.
Defines the applicability of the operating instructions to the MLG-2.
Identifies the intended audience for these operating instructions.
Outlines the topics covered in the operating instructions.
Explains symbols and notes used throughout the document.
Lists and defines abbreviations used in the manual.
Specifies the necessary qualifications for personnel handling the MLG-2.
Defines the intended use and limitations of the MLG-2.
Provides essential safety guidelines for operating the MLG-2.
Describes the information found on the MLG-2 Pro type labels.
Explains the structure and meaning of the MLG-2 Pro type code.
Details the various monitoring heights available for MLG-2 models.
Lists the key features and properties of the MLG-2.
Describes the basic setup and operational principles of the MLG-2.
Explains the concept of scan time and its relation to MLG-2 performance.
Details how beam separation affects object detection capabilities.
Explains the operational safety margin of the MLG-2.
Describes the different operating modes available for the MLG-2.
Covers the various interfaces provided by the MLG-2 for data output.
Details the LEDs and control panel elements of the MLG-2.
Illustrates various practical applications of the MLG-2.
Lists the items included in the MLG-2 delivery package.
Provides guidance on optimal mounting configurations for MLG-2 units.
Details how to mount MLG-2s with opposing light beams.
Explains mounting MLG-2s with parallel light beams.
Describes mounting MLG-2s perpendicular to each other.
Specifies minimum distances to avoid reflections during mounting.
Details the step-by-step process for mounting the MLG-2.
Instructions for attaching the QuickFix mounting bracket.
Instructions for attaching the adjustable FlexFix mounting bracket.
Covers the electrical connection and wiring of the MLG-2 Pro.
Explains the use of T-distributors for MLG-2 connections.
Details the mechanical alignment steps for sender and receiver.
Describes the process of aligning and performing teach-in.
Covers software installation and initial preparation for SOPAS ET.
Overview of the SOPAS ET software interface and navigation.
Explains how to view system boundaries, status, and interfaces in SOPAS.
Configuring measurement and diagnostic functions for switching outputs.
Configures output switching based on measured object height.
Sets up object detection based on configured or defined patterns.
Configures output switching based on object size or width.
Configuring measurement and diagnostic functions for analog outputs.
Provides advanced configuration options for output signals.
Describes how to divide the detection area into zones for analysis.
Details the teach-in process for device calibration and setup.
Adjusts response time, operating reserve, and detection type.
Covers MLG-2 configuration using its integrated web server.
Configuring MLG-2 functions using IO-Link acyclic service data.
Details the output of process data from the MLG-2 via IO-Link.
Describes the configurable data payload for RS-485 transmission.
Explains how data volume is determined for beam functions.
Provides examples for calculating total RS-485 data volume.
Guidance on how to respond to identified malfunctions.
Information on contacting SICK support for assistance.
Explains the meaning of LED indicators for fault diagnosis.
Details advanced diagnostic options available in SOPAS ET.
Instructions for the proper disposal of the MLG-2 device.
Information on returning the device for processing or analysis.
Presents detailed technical specifications of the MLG-2.
Includes various diagrams illustrating technical data and performance.
Provides physical dimensions and mounting details of the MLG-2.
Lists available accessories for the MLG-2.
Provides information on the EU declaration of conformity.
To Next Page
