SICK MLG-2 Pro

17 List of figures
1. Type label of sender................................................................................................... 11
2. Type label of receiver..................................................................................................11
3. MLG-2 Pro....................................................................................................................15
4. Detection area of the MLG-2......................................................................................16
5. Schematic depiction of available beam separations (mm)..................................... 17
6. Detection area with beams blanked..........................................................................18
7. Standard scan method...............................................................................................20
8. Scan time in relation to the number of beams.........................................................20
9. Cross-beam function.................................................................................................. 21
10. High-speed scan......................................................................................................... 21
11. Scan time in relation to the number of beams when using the high-speed scan..21
12. Minimum detectable object....................................................................................... 22
13. Minimum detectable object length............................................................................23
14. Cross-beam function.................................................................................................. 24
15. Minimum detectable object size with high measurement accuracy.......................25
16. Status of the beams................................................................................................... 28
17. LEDs on the sender.................................................................................................... 31
18. LEDs on the front side................................................................................................32
19. Control panel of the MLG-2 Pro................................................................................. 32
20. Start and end detection............................................................................................. 33
21. Detection of transparent objects...............................................................................33
22. Detection of small objects......................................................................................... 34
23. Traffic applications..................................................................................................... 34
24. Volume measurement................................................................................................ 34
25. Contour measurement............................................................................................... 34
26. Placement with light in opposite directions..............................................................35
27. Distances when light is in the same direction..........................................................36
28. Graph, distances when light is in the same direction..............................................37
29. Graph, distances when light is in the same direction (XZ)...................................... 38
30. Placement of two light grids at right angles..............................................................38
31. Graph, minimum distance from reflective surfaces.................................................39
32. The sender and receiver are aligned incorrectly...................................................... 40
33. Mount QuickFix bracket to a profile frame................................................................41
34. Mounting the FlexFix bracket on a profile frame......................................................42
35. Inserting the MLG-2 in the FlexFix brackets..............................................................42
36. T-distributor connection............................................................................................. 46
37. T-distributor for sender, receiver, PLC........................................................................47
38. T-distributor for sender, receiver, IO-Link master......................................................48
39. T-distributor for sender, receiver, existing MLG connection.....................................49
40. Alignment with the QuickFix bracket......................................................................... 50
41. Alignment with the FlexFix bracket............................................................................51
42. Rotate the receiver once............................................................................................ 51
43. Control panel of the MLG-2 Pro................................................................................. 52
44. Device selection, operating mode and user level.....................................................54
45. SOPAS ET interface.....................................................................................................55
46. Display of the system boundaries............................................................................. 55
47. Wizards........................................................................................................................56
48. Status display for inputs and outputs....................................................................... 56
49. Display of the process quality.................................................................................... 57
50. Basic functions and status of the output..................................................................58
51. Detection area – Simulation...................................................................................... 59
52. Combining beams into zones.....................................................................................59
53. Using beams for object recognition...........................................................................60
54. Using beams for height classification....................................................................... 60
LIST OF FIGURES 17
8017460.ZIK1/2017-02-13 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 Pro
133
Subject to change without notice