Three-part interface
Figure 45: SOPAS ET interface
The left-hand side of the graphical interface provides information on the system boun‐
daries, the status and the interfaces of the connected MLG-2.
The central area shows a simulation of the light grid and its beams.
The right-hand side of the interface lists the available options in expandable menus.
7.2.1 System boundaries, status, and interfaces
System boundaries
Figure 46: Display of the system boundaries
Under “System boundaries”, SOPAS ET displays the reproducibility, minimum presence
time, and response time (see "Scan time", page 19).
SOPAS ET displays the maximum recommended sensing range with which the MLG-2
can be safely operated.
CONFIGURATION WITH SOPAS ET
7
8017460.ZIK1/2017-02-13 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 Pro
55
Subject to change without notice
To Next Page
Loading...
