7.12 Simulation
If you configure an MLG-2 offline – i.e., without a connection to the device – you can
simulate the operation of the MLG-2 using simulation objects. The objects required for
the simulation can be set via the expandable Simulation menu. This includes the num‐
ber of objects, their shape, size, and speed.
b
Click on the plus sign to add a simulation object.
Figure 121: Add simulation object
b
Select the object shape.
Figure 122: Determine the shape of the simulation object
b
Enter the height, width, and length in mm. Enter the object speed in m/s.
7
CONFIGURATION WITH SOPAS ET
102
O P E R A T I N G I N S T R U C T I O N S | MLG-2 Pro 8017460.ZIK1/2017-02-13 | SICK
Subject to change without notice
To Next Page
Loading...
