SICK MLG-2 Pro

3.10 Display and operating elements
3.10.1 Sender
The sender has three LEDs on its front. The LEDs are located on the connection side.
The section LED indicators and error indicators on page 116 explains the meaning of
the LED indicators.
1
2
3
Figure 17: LEDs on the sender
1
Yellow
2
Red
3
Green
3.10.2 Receiver
LEDs
The receiver has three LEDs on its front and a control panel with LEDs and membrane
keys on its rear. The LEDs and the control panel are located on the connection side.
The section LED indicators and error indicators on page 116 explains the meaning of
the LED indicators.
PRODUCT DESCRIPTION 3
8017460.ZIK1/2017-02-13 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 Pro
31
Subject to change without notice