What to do if there is a short-circuit in SICK MLG-2 Prime Measuring Instruments?
If you suspect a short-circuit, carefully inspect the wiring and connections of your SICK Measuring Instruments for any signs of damage or short-circuits. Address any issues found to resolve the problem.
What to do if the light path is blocked in SICK MLG-2 Prime Measuring Instruments?
If the light path is blocked (at least one beam blocked) in your SICK Measuring Instruments, check the surrounding area for any obstructions. Removing any obstructions that are blocking the light path should solve the problem.
How to fix contamination warning or poor alignment in SICK MLG-2 Prime?
If you're receiving a contamination warning or the alignment aid is active with poor alignment on your SICK Measuring Instruments, make sure that the sensor is clean. Also, ensure that it is properly aligned to resolve the issue.
What to do if error occurred during teach-in because at least one beam is blocked in SICK MLG-2 Prime?
If an error occurs during the teach-in process because at least one beam is blocked for your SICK Measuring Instruments, make sure that all beams are unobstructed during the teach-in process. This should allow the teach-in to complete successfully.
General| Brand | SICK |
|---|---|
| Model | MLG-2 Prime |
| Category | Measuring Instruments |
| Language | English |
Explains the purpose and scope of the operating instructions.
Defines the applicability of the operating instructions for the MLG-2.
Identifies the intended readers and users of the manual.
Outlines the topics and information depth provided in the manual.
Explains the meaning of symbols, notes, and recommendations used.
Lists and defines abbreviations used throughout the document.
Specifies the required qualifications for personnel involved in mounting and operation.
Details the intended use and potential misuse of the MLG-2 device.
Provides general safety notes and precautions for using the MLG-2.
Describes the information found on the MLG-2 Prime sender and receiver type labels.
Explains the structure and meaning of the MLG-2 Prime type code.
Highlights the key features and properties of the MLG-2 Prime.
Details the setup process and operational principles of the MLG-2.
Explains scan time and its impact on device performance.
Discusses beam separation and its relation to minimum detectable object size.
Defines operating reserve and its importance for reliable measurements.
Describes the available interfaces and data output options.
Details the display indicators and operating elements on the sender and receiver.
Explains the functionality of inputs on the MLG-2 receiver and sender.
Provides typical applications and use cases for the MLG-2.
Lists the items included in the MLG-2 Prime package.
Provides guidelines for optimal mounting and avoiding interference.
Step-by-step instructions for mounting the device.
Details wiring and connection procedures for sender and receiver.
Procedures for physically aligning the sender and receiver units.
Guidance on device alignment and the teach-in process.
Using the control panel for device setup and configuration.
Details various measurement functions and their applications.
Configuring functions using IO-Link service data.
Saving and transferring MLG-2 parameters via IO-Link.
Describes MLG-2 process data output formats and transmission.
Provides maintenance recommendations and front screen cleaning procedures.
Outlines procedures for identifying and responding to device malfunctions.
Information on how to contact SICK support for assistance.
Explains how to interpret LED status and error codes for diagnostics.
Provides information on proper disposal methods for the device.
Details the procedure and information required for returning the device.
Presents general and electrical specifications of the MLG-2.
Includes diagrams illustrating technical parameters.
Provides physical dimensions and drawings of the MLG-2.
Details on how to order the MLG-2 and related products.
Lists available accessories, mounting materials, and cables.
Contains information on EU directives and conformity declarations.
To Next Page
