Need help?Do you have a question about the SICK DUSTHUNTER T200 and is the answer not in the manual?
General| Power Supply | 24 V DC |
|---|---|
| Protection Class | IP65 |
| Light source | LED |
| Output Signal | 4 ... 20 mA |
| Operating Temperature | -20 ... +50 °C |
| Path length | 0.5 m ... 4 m |
| Response time | < 1 second |
| Device type | Dust measuring device |
Details hazards associated with hot/aggressive gases, high pressure, and electrical equipment.
Outlines user responsibilities regarding designated users, local conditions, and document retention.
Explains the optical measuring principle and the variables derived from transmission.
Lists and describes the standard components of the DUSTHUNTER T measuring system.
Compares features and configurations across DUSTHUNTER T50, T100, and T200 models.
Covers on-site assembly tasks including fitting components like flange, MCU, and purge air unit.
Details electrical safety, grounding, wiring, and system safety responsibilities.
Procedures for cleaning optical interfaces and performing maintenance on specific units.
To Next Page
