SICK MLG-2 Prime

6 Commissioning
6.1 Mechanical alignment of sender and receiver
After mounting and electrical installation, the sender and receiver must be aligned with
eac
h other. No objects should be located between the sender and the receiver. The
light path must be clear.
Alignment with the QuickFix bracket
You have the following adjustment options with the QuickFix bracket:
•
Adjust vertically (H)
Figure 29: Alignment with the QuickFix bracket
Ali
gnment w
ith the FlexFix bracket
You have the following adjustment options with the FlexFix bracket:
•
Adjust vertically (H)
•
Rotate (± 15°)
6 COMMISSIONING
34
O P E R A T I N G I N S T R U C T I O N S | MLG-2 Prime 8018715.16YM / 2020-02-13 | SICK
Subject to change without notice