SICK MLG-2 Prime - Setting the Application for Analog Outputs and Switching Output; Graph, Setting the Output and Application for MLG-2 Prime with Analog Outputs and Switching Output

NOTE
Wit
h the height classification and object recognition applications, the reference objects
must be located in the detection area.
7.1.3 Setting the application for analog outputs and switching output
Step 1:
Select output
Step 2: Select application
NBB
Output
4 … 20 mA
NBB
Output
20 … 4 mA
FBB
Output
4 … 20 mA
FBB
Output
20 … 4 mA
LBB
Output
4 … 20 mA
LBB
Output
2
0 … 4 mA
Status of the digital
output is shown
Figure 37: Graph, setting the output and application for MLG-2 Prime with analog outputs and
sw
itching output
7 OPERATING THE MLG2 PRIME
40
O P E R A T I N G I N S T R U C T I O N S | MLG-2 Prime 8018715.16YM / 2020-02-13 | SICK
Subject to change without notice