SICK MLG-2 Prime User Manual

3.10 Inputs
3.10.1 Switching input on the MLG-2 Prime receiver
On the MLG-2 Prime, no switching input is provided for the teach-in process as stan‐
dard. A preconfigured variant is possible (see "MLG-2 Prime preconfigurations",
page 12).
3.10.2 Test input on the sender
The test input can be used to switch off the sender. This simulates a complete blocking
of t
he be
ams. This makes it possible to test the behavior of the switching or analog out‐
puts that have been configured accordingly.
3.11 Application examples
3.11.1 Application examples for the MLG2 Prime
Typical applications for the MLG-2 Prime include height classification, start and end
de
t
ection, loop control, access controls or width measurement.
Table 15: Application examples for the MLG-2 Prime
Figure 17: Height classification and overhang
mea
surement
Figure 18: Position detection on a conveyor
belt
Figure 19: Slack regulation Figure 20: Access control
PRODUCT DESCRIPTION 3
8018715.16YM / 2020-02-13 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 Prime
25
Subject to change without notice

SICK MLG-2 Prime Specifications

General

Brand	SICK
Model	MLG-2 Prime
Category	Measuring Instruments
Language	English