SICK MLG-2 Prime

16 List of figures
1. Type label of sender................................................................................................... 10
2. Type label of receiver..................................................................................................10
3. MLG-2 Prime............................................................................................................... 14
4. Detection area of the MLG-2......................................................................................15
5. Schematic representation of available beam separations (mm)............................ 16
6. Detection area with beams blanked..........................................................................17
7. Standard scan method...............................................................................................18
8. Scan time in relation to the number of beams.........................................................18
9. Cross-beam function.................................................................................................. 19
10. Minimum detectable object....................................................................................... 19
11. Minimum detectable object length........................................................................... 20
12. Cross-beam function.................................................................................................. 21
13. LEDs on the sender.................................................................................................... 23
14. LEDs on the front of the receiver...............................................................................23
15. MLG-2 Prime control panel with switching outputs..................................................24
16. MLG-2 Prime control panel with analog outputs and switching output.................. 24
17. Height classification and overhang measurement...................................................25
18. Position detection on a conveyor belt........................................................................25
19. Slack regulation.......................................................................................................... 25
20. Access control.............................................................................................................25
21. Placement with light in opposite directions.............................................................. 26
22. Distances when light is in the same direction..........................................................27
23. Graph, distances when light is in the same direction.............................................. 27
24. Graph, minimum distance from reflective surfaces.................................................28
25. The sender and receiver are aligned incorrectly...................................................... 28
26. Mount QuickFix bracket to a profile frame................................................................30
27. Mounting the FlexFix bracket on a profile frame...................................................... 31
28. Inserting the MLG-2 in the FlexFix brackets............................................................. 31
29. Alignment with the QuickFix bracket......................................................................... 34
30. Alignment with the FlexFix bracket............................................................................ 35
31. Rotate the receiver once............................................................................................ 35
32. Alignment aid – LEDs alignment quality................................................................... 36
33. Control panel with LEDs and membrane keys..........................................................37
34. Control panel........................................................................................................... 0
35. of the MLG-2 Prime with switching outputs.............................................................. 37
36. MLG-2 Prime control panel with analog outputs and switching output.................. 37
37. Graph, setting the output and application for MLG-2 Prime with switching outputs
..................................................................................................................................... 39
38.
Graph, setting the output and application for MLG-2 Prime with analog outputs
and switching output.................................................................................................. 40
39. Graph, system settings on operating level 2............................................................ 41
40. Example of object detection...................................................................................... 42
41. Example of height classification................................................................................ 42
42. Example for object recognition.................................................................................. 43
43. Example for FBB......................................................................................................... 44
44. Example for LBB......................................................................................................... 44
45. Example for NBB.........................................................................................................45
46. Graph, MLG-2 Prime response time and minimum presence time........................ 53
47. MLG-2 Prime (mm) dimensional drawing..................................................................54
16 LIST OF FIGURES
60
O P E R A T I N G I N S T R U C T I O N S | MLG-2 Prime 8018715.16YM / 2020-02-13 | SICK
Subject to change without notice