Figure 13: LEDs on the sender
1
Yellow
2
Red
3
Green
3.9.2 Receiver
The receiver has three LEDs on its front and a control panel with LEDs and membrane
k
e
ys on its rear. The LEDs and the control panel are located on the connection side.
The section LED indicators and error indicators on page 49 explains the meaning of
the LED indicators.
Figure 14: LEDs on the front of the receiver
1
Yellow
2
Red
PRODUCT DESCRIPTION 3
8018715.16YM / 2020-02-13 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 Prime
23
Subject to change without notice