SICK MLG-2 Pro

3.3 MLG-2 product properties
•
Different beam separations from 2.5 mm to 50 mm
•
Monitoring heights from 130 to 3,140 mm
•
Operating range up to 2 m, 5 m or 8.5 m
•
Quick response time
•
Convenient configuration using the SOPAS ET software interface
•
Detection of transparent objects
•
Dust- and sunlight-resistant
•
Integrated applications including object detection, height classification, etc.
3.4 Setup and function
The MLG-2 is an optical light grid. It comprises a sender and a receiver.
The sender consists of sender optics, several sender elements (LEDs), and actuation
electronics. The receiver consists of receiver optics, several receiver elements (photodi‐
odes) and evaluation electronics.
3.4.1 MLG-2 Pro device components





Figure 3: MLG-2 Pro
r
Receiver
s
Sender
1
Receiver connection
2
Ethernet configuration interface on the receiver
3
Sender connection
The receiver has a connection for the power supply, for inputs and outputs, and for syn‐
chronization. It also has an Ethernet connection for configuration via TCP/IP.
The sender has a connection for the power supply, for synchronization, and for a test
input.
PRODUCT DESCRIPTION
3
8017460.ZIK1/2017-02-13 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 Pro
15
Subject to change without notice