SICK MLG-2 Pro

Output settings
General options for analog outputs see "Advanced settings for the outputs", page 84.
7.5.5 Measurement of the object position
An analog output changes its output current analogously to the position of the object
center in the detection area.
Figure 94: Measurement of the object position
Output settings
For general options for analog outputs, see section see "Advanced settings for the out‐
puts", page 84.
7.5.6 Measurement of the hole position
An analog output changes its output current analogously to the position of the hole cen‐
ter in the detection area.
Figure 95: Measurement of the hole position
Output settings
General options for analog outputs see "Advanced settings for the outputs", page 84.
7.5.7 Diagnostic functions
•
Teach-in quality
An analog output changes its output current analogously to the teach-in quality
(see "Teach-in", page 17).
•
Process quality
An analog output changes its output current analogously to the process quality
(see "Teach-in", page 17).
CONFIGURATION WITH SOPAS ET 7
8017460.ZIK1/2017-02-13 | SICK O P E R A T I N G I N S T R U C T I O N S | MLG-2 Pro
83
Subject to change without notice