SICK MLG-2 Pro User Manual

Ö
The LED flashes evenly.
ôKõ
The LED flashes briefly.
o
The LED is off.
b
Take action ...
Instructions for taking action are indicated by an arrow. Carefully read and follow the
instructions for action.
CAUTION
Warning!
A warning indicates a specific or potential hazard. This is intended to protect you
against accidents.
Read carefully and follow the warnings!
s r Sender and receiver
In figures and connection diagrams, the symbol s indicates the sender and r indi‐
cates the receiver.
1.6 Abbreviations used
BNB Beam Number (x) Blocked
BNM Beam Number (x) Made
CBB Central Beam Blocked
CBM Central Beam Made
FBB First Beam Blocked
FBM First Beam Made
IDI Inner Dimension
LBB Last Beam Blocked
LBM Last Beam Made
MDA Minimum Detectable Absorption
MDO Minimum Detectable Object
MLG-2 Measuring automation light grid 2
MOL Minimum Detectable Object Length
MSB Most Significant Bit
NBB Number of Beams Blocked
NBM Number of Beams Made
NCBB Number of Consecutive Beams Blocked
NCBM Number of Consecutive Beams Made
ODI Outer Dimension
RLC Run-length code
SDD SOPAS Device Description
PLC Programmable logic controller
1 ABOUT THIS DOCUMENT
8
O P E R A T I N G I N S T R U C T I O N S | MLG-2 Pro 8017460.ZIK1/2017-02-13 | SICK
Subject to change without notice

SICK MLG-2 Pro Specifications

General

Brand	SICK
Model	MLG-2 Pro
Category	Measuring Instruments
Language	English