SICK MLG-2 Pro

The minimum detectable object (MDO) and the minimum detectable object length
(MOL) are shown in millimeters as well as graphically.
The system boundaries are largely dependent on the configured performance options
(see "Performance options", page 93).
Wizards
Figure 47: Wizards
You can start the Installation Wizard or Application Wizard under Wizards.
•
The Installation Wizard will help you to align the MLG-2 and carry out the teach-in
process.
•
The Application Wizard will help you to configure the settings for the switching out‐
puts (also called digital outputs) or analog outputs of the MLG-2. Only the neces‐
sary adjustments for the MLG-2 will be offered, according to the choice of applica‐
tion.
Recommendation
Use this wizard for the initial configuration of a device. The separate adjustments avail‐
able in the main interface allow the user to make specific changes to the configuration.
Status inputs/outputs
Under Status inputs/outputs, SOPAS ET shows the status of the switching outputs and the
analog outputs as well as the digital inputs (depending on the I/O configuration).
Figure 48: Status display for inputs and outputs
Next to the relevant indicators, you will find the function configured for the inputs and
outputs.
Example:
7
CONFIGURATION WITH SOPAS ET
56
O P E R A T I N G I N S T R U C T I O N S | MLG-2 Pro 8017460.ZIK1/2017-02-13 | SICK
Subject to change without notice