SICK MLG-2 Pro

Figure 69: Object recognition, static
1
Output not switched
2
Output switched
3
Made beam
4
Blocked beam
5
Configured beam
•
Dynamic
An object will be recognized at every point in the detection area. The object is
allowed to move within the detection area. This also applies to multiple objects,
e.g., the feet of a pallet.
Figure 70: Object recognition, dynamic
1
Output not switched
2
Output switched
3
Made beam
7 CONFIGURATION WITH SOPAS ET
70
O P E R A T I N G I N S T R U C T I O N S | MLG-2 Pro 8017460.ZIK1/2017-02-13 | SICK
Subject to change without notice