Figure 18: Several inputs and outputs
It is possible to connect several inputs and outputs with logic blocks.
•
A combination of logic blocks is possible as well.
•
Pay attention to inputs and outputs (Integer/Boolean).
•
Click on Settings (=gear) to configure parameters and values of the logic
block or input/output variable.
•
Please note that only integer values are allowed (0-65535).
NOTE
Not all logic blocks are adjustable.
8 DEVICE FUNCTIONS
76
O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200 8024482.1FJ7 /2022-05-31 | SICK
Subject to change without notice
To Next Page
Loading...
