AC MUM0096 rev. 07 - 7 -
MR21
6. SAFETY REQUIREMENTS
WARNING
The winch MUST be installed in an area that is strictly kept under lock
and key. Access to this area must be limited to qualied maintenance
personnel who have been authorised by the customer. The following
noce must be axed to the door providing access to this area:
LIFT MACHINERY
HAZARD ACCESS
FORBIDDEN TO
UNAUTHORISED
PERSONS
Installers or maintenance personnel must be aware of the
dangers associated with the machine and must have read and
understood the safety precauons in this manual.
Before installing the winch, the customer must verify that the concrete
slab and/or the support structures of the shiing loads and the winch
meet the required safety factors.
The Customer MUST also respect the distances from walls and from
other machines in accordance with the direcves and standards in force
in the country where the winch will be installed.
LIFTING
To move the winch (see also Chap. 8 "Transport")
use a suspension-type liing system connected
to the eyebolts on the reducon unit, or use an
adequately sized forkli (see Chap 7 "Technical
features") to li the winch a maximum of 30 cm o
the oor and move the winch slowly.
To Next Page
Loading...
Need help?
General
