Sicor MR21 - Moving the Winch

AC MUM0096 rev. 07 - 11 -
MR21
8. MOVING THE WINCH
WARNING
RISK OF CRUSHING,
IMPACT AND ABRASION
Personnel responsible for handling the winch must read
the safety requirements in paragraph 6 of this manual and must
wear work gloves and safety shoes.
The winch is shipped by SICOR in crates or on a pallet wrapped in nylon lm.
WARNING
Never move the crates by dragging them. Always li them. Before
removing the machine from its packing, place it as near as possible
to its nal posion.
To move the crate, use a crane with ropes or an adequately sized
forkli with long forks (see Chap. 7 "Technical features").
The forks must also be posioned as far apart as possible to
avoid pping over.
If the machine has been shipped on a pallet, use an adequately sized load spreader when
moving with a crane so that the liing cables or chains are kept in a vercal posion and do not
damage parts of the machine.