AC MUM0096 rev. 07 - 12 -
MR21
WARNING
During handling, remember the following points:
- proceed slowly
- do not li the crate more than 30 cm o the ground unless obsta-
cles are present.
- lay the crate on the ground slowly
When unpacking the crate, start from the top and use suitable
tools to open it. Aerwards, if the packaging is a crate, remove
the side walls, removing the nails below from the pallet.
When the machine is unpacked, DO NOT DISPOSE OF THE
PACKAGING IN THE ENVIRONMENT, but rather reuse it or send
it to a recycling company.
Once the walls of the crate have been removed, check that the
supply corresponds with the shipping document and the order.
If there is a discrepancy with the order, immediately nofy
SICOR or their agent. When necessary, proceed as described in
paragraph 4 "General delivery notes".
Aer slinging the winch, remove the screws that aach it to the pallet before liing it.
To Next Page
Loading...