AC MUM0096 rev. 07 - 13 -
MR21
When moving the unpacked winch, use a crane or
an adequately sized forkli with wide forks and a
suspension-type liing system connected to the eyebolts
on the reducon unit and a non-metallic strap wrapped
around the motor.
WARNING
Make sure there are no people exposed within the operang range of transport means with the winch
(danger zone).
If the winch is stored for long periods, leave it on its pallet
and make sure it is adequately protected (at least with a
waterproof covering) to prevent oxidaon of the internal or
external parts of the machine.
Remember that the oxidaon of shas or other mechanical parts
reduces its fague strength.
During the liing and transport of the winch, make sure that it does not
lt from the horizontal by more than a=25° if lted forward and b=25°
if lted towards the motor part because the oil in the winch may leak
out. If the winch has to be transported in a slanted posion exceeding
these angles, the winch order must specify a request for supply with “oil
separately”.
a°
b°
To Next Page
Loading...
Need help?
General
