Description
28 9229 9992 176 0D
2013-07-08
Low-voltage interface X0, 64-pin
For connection of the control line, the standard version of the vacuum circuit-
breakers is equipped with a 64-pin low-voltage interface X0 (68.7).
The 64-pin plug (68.7.1) for the external terminal, is suitable for crimp termination of
control lines with a nominal cross-section of 1.5 mm
2
.
Terminal strip (optional) Instead of the 64-pin plug (68.7.1), a terminal strip (68.7.2) can be ordered as
interface to the terminal at the customer's site. Assignment of the terminals is done
according to the circuit diagram supplied.
Fig. 36 Low-voltage interface X0 Fig. 37 Terminal strip (optional)
To Next Page
Loading...
