Transport, storage and packing
9229 9992 176 0D 7
2013-07-08
Opening the transport unit • Place the transport unit on a level, non-slip and pressure-resistant surface.
• Remove lifting gear or transport means.
• Remove plastic wrap.
• Lever out fasteners from the carton and lift off carton.
Fig. 3 Removing the carton
Note
Do not use the vacuum circuit-breaker if parts are broken, i.e. if you find cracks,
flakings, bent metal parts, damaged plug-in contacts, tears or bare cables.
Send it back in its original transport unit (see “Reusing the transport unit”,
page 16).
Note
Carrying straps may scrape along the vacuum circuit-breaker and damage it.
If necessary, cover carrying straps with edge protection.
Select length and position of the carrying straps so that the pole heads are not
compressed.
To Next Page
Loading...
